Updated checklist posted [V3].
Progress today
Completed removing turn signal from left side rear fairing. Screw frozen, stripped. Used drill and manual screw extractor to remove. Replaced original rusted steel screws with new stainless for both rear turn mounts. All rear plastic now ready for repair (then paint).
Removed front upper fairing assembly. Extracted left flange screw – plastic threaded brass insert spun. Removed and re-habbed mirrors and boots. Reference note: mirror mount points (bolt holes) are 55mm apart. Cleaned out debris. Cleaned/refinished dash, black rubber and plastic parts.
Mirror inner covers (after)
dash area (before, after)
windscreen (needs serious polishing)
End of the day:
side and front
